Precautions for Use of Air Stapler Gun Staples

During the use of air stapler gun staples, there are some matters that we need to pay attention to, which are also mentioned in our product manual, but since these precautions are more important, let's take a look at them together.

Here is the content list:

• Precautions for using air stapler gun staples

• air stapler gun staples contains staples caution

Precautions for using air stapler gun staples

If the air stapler gun staples get stuck, turn off the air supply and set a safety lock to prevent the trigger from being pulled until the magazine case is opened to release the stuck staples. If you are disconnecting the air supply to the air stapler gun staples, do not disconnect the air supply hose until the air supply is turned off and the compressed air is released. Procedure for shutting off and releasing compressed air. 

After the pressure is relieved, disconnect the air supply hose from the air tool. To lubricate internal components during operation, an air line lubricator with aviation oil should be used, adjusted to 2 drops per minute. If an air line lubricator is not used, this procedure should be repeated after every two to three hours of use. Be aware that factors other than the tool may affect its operation and efficiency, such as reduced output, excess moisture loss from the air or restrictions in the airlines, or the use of improperly sized or in poor condition connectors that reduce the air supply. Sand or colloidal deposits inside the tool may also reduce its efficiency. This can be corrected by cleaning the air filter of the air stapler gun staples and flushing the tool with glue or oil, otherwise, it may be necessary to remove the motor.

air stapler gun staples contains staples caution

Careless and wrong handling of air stapler gun staples may cause the nails to shoot out unexpectedly, so we need to pay attention to the following points when using them. The first is do not point the air stapler gun staples at yourself or anyone nearby to avoid injury by accidentally triggering the release of the staples, and do not start the air stapler gun staples unless it is firmly against the workpiece. The second is that if the tool is not in contact with the workpiece, the fastener may be off target. When the staple is stuck in the tool, disconnect the tool from the pipe.

 When removing the stuck staple, if the air stapler is connected to gun staples, air stapler gun staples may activate unexpectedly. And then don't use this air stapler gun staples to secure the cable. Because air stapler gun staples are not designed for cable installation, they may damage the cable's insulation, resulting in an electric shock or fire hazard. Lastly, never insert staples at the edge of the workbench, as the edge may fail and fly out, endangering yourself or others nearby. Never fire the tool at an angle. It must be perpendicular to the work surface.

If you are interested in air stapler gun staples, you can contact us, our website is https://www.jkstaple.com/, you are welcome, and look forward to cooperating with you.