Views: 0 Author: Site Editor Publish Time: 2022-08-20 Origin: Site
The stapler was invented not for office use, but for binding books. The earliest use of industrial staples may be King Louis XV of France. The industrial staples he uses are meticulously handcrafted with royal emblems printed on them and are used to bind royal documents together.
Here is the content list:
Origin of Industrial Staples.
Development of Industrial Staples.
The early stapler was complicated and bulky, and it became lighter with continuous improvement. The traditional Western bookbinding method is based on the method of "sticking code", that is, the pages are sewn together with thin iron wire, and the process is very cumbersome. In the middle of the 19th century, to meet the needs of the development of the printing industry, some people thought of making machines for binding books. In 1868 Charles Gould received a British patent for an industrial staples stapler. He used iron wire as the material, cut the wire into a certain length, pushed the tip of the wire through the paper, and then folded it down. This is a direct prototype of the modern stapler. However, this machine can only hold one Industrial staple at a time. When the staples pass through the paper, the machine itself cannot bend the staples. The nails must be bent with a hammer to fix them on the back of the paper. After this, George W. McGill of New York designed and built a new binding machine that could insert, bend, and fasten nails in a single operation, much like a modern stapler. On February 18, 1879, McGill patented the stapler.
In 1869, Thomas Briggs of Boston, Massachusetts, invented the machine that could do this. He founded the "Boston Wire Binder Company" which manufactured and sold such machines. His machine breaks the wire and bends it into a U-shape, then uses it to staple through the pages, and then bends it to hold the book in place. Briggs' original stapler was quite complicated because it had so many steps. In development, the complex shortcomings of the stapler were gradually improved, and the staples were changed to single staples that were performed and penetrated directly through the paper. Machines with a row of loose industrial staples can be loaded early on but must be operated slowly and carefully to avoid jamming.
Later, someone thought that it would be more convenient to glue a long strip of industrial staples to "relieve the troubles of operation, installation, and transportation for those who use loose industrial staples". The idea, though unpatented, spread quickly in an increasingly competitive industry. He later adopted a manufacturing process that first broke and bent iron wire into a string of "U" shaped industrial staples. The nails fit into a much simpler machine that embeds the nails into the paper. This machine is the prototype of today's stapler. Early "U" staples were wrapped in paper or individually loaded into staplers.
If you are interested in industrial staples, you can contact us, our website is https://www.jkstaple.com/, you are welcome, and look forward to cooperating with you.