Air Stapler Gun Staples Requirements for Air Supply

Air stapler gun staples compressed air can be dangerous, make sure you are familiar with all precautions associated with using a compressor and compressed air supply before using it.

Here is the content list:

• Knowledge of Air Stapler Gun Staples

• Precautions for Air Stapler Gun Staples

Knowledge of Air Stapler Gun Staples

First air stapler gun staples use only clean, dry, conditioned compressed air as a power source. At the same time, air compressors and air stapler gun staples used with impact wrenches must comply with the corresponding European Community Safety Directives. The air compressor's wear and corrosion of impact wrenches can be accelerated due to moisture or oil build-up. We ensure that any moisture is removed from the compressor daily and the inlet filter is kept clean. Air Stapler Gun Staples should increase line pressure or hose ID to compensate for unusually long air hoses (over 10M). The minimum hose diameter should be 6 mm (1/4") ID and fittings should have the same internal dimensions, the minimum hose diameter should be 5/16" (8mm) ID, and the fittings should have the same internal dimensions. The air inlet for connecting to the air source is a 1quick-release ease type. The pressure rating of the air hose of the air stapler gun staples must be at least 150% of the maximum working pressure of the tool.

Precautions for Air Stapler Gun Staples

If the air stapler gun staples use an automatic in-line filter/regulator, it will keep the air stapler gun staples in good condition, but should be checked and topped up regularly. The air stapler gun should use SAE 10 oil with the lubricator adjusted to about 2 drops per minute. Never exceed the maximum working pressure of the tool when in use. The tool is recommended to be operated with air pressure not exceeding 90 psi. Higher pressure and dirty air can shorten tool life due to faster wear and can be a safety hazard. Air Stapler Gun Staples work over a wide range of air pressures. It is recommended to set the air pressure between 60 and 100psi. The runtime is at the tool. If desired, attach an in-line mini-oiler to the tool, the mini-oiler will help extend the life of your air tool. If not using a small oil dispenser, run a few drops of oil through the tool before use. It can be entered through the air intake. Connect a suitable hose to the female air inlet, then connect the other end of the hose to the air supply. Finally, turn on the air supply of the air stapler and check for air leaks, make sure there are no problems before using it.

Our official website is https://www.jkstaple.com/. If you work with Air Stapler Gun Staples or want to know more about our company, you can communicate with us on the website. Our cost-effective products are well received by everyone. We will wholeheartedly provide users with more and better services with high-quality products, good service, and competitive prices!